| Protocol | nas | Network | lte |
|---|---|---|---|
| Spec | 3GPP TS 24.301 | Spec Section | Release 18 message definition for Remote UE Report Response |
| Direction | MME to UE | Message Type | EMM signaling |
| Full message name | LTE Remote UE Report Response |
|---|---|
| Protocol | NAS |
| Technology | LTE |
| Direction | MME to UE |
| Interface | N1 over LTE access / S1-MME control path |
| Signaling bearer / channel | NAS signaling / Used immediately after Remote UE Report in a remote UE or CIoT reporting branch. |
| Typical trigger | Triggered after the network processes a Remote UE Report. |
| Main purpose | Confirms or responds to the remote UE or CIoT report that the UE sent in the preceding NAS branch. |
| Main specification | 3GPP TS 24.301, Release 18 message definition for Remote UE Report Response |
| Release added | Release 13 |
| Procedures where used | Remote UE reporting, Control Plane CIoT EPS Optimization |
Remote UE Report Response is the LTE NAS message the network sends after it processes a Remote UE Report.
Confirms or responds to the remote UE or CIoT report that the UE sent in the preceding NAS branch.
Remote UE Report Response is the network's LTE NAS reply to an earlier Remote UE Report.
Call flow position: Network response message sent after the UE delivered remote UE or CIoT report content.
Typical state: The reporting branch is closing or continuing based on the network response.
Preconditions:
Next likely message: Later reporting continuation or branch closure
Previous message(s): Remote UE Report
Next message(s): Later reporting or application continuation
Security context: Usually protected because it appears in an active NAS context.
Remote UE Report Response
Remote UE response container OPTIONAL
Read the response container first and then correlate it with the earlier report branch.
Remote UE Report Response
Protocol discriminator: EPS mobility management
Security header type: Integrity protected and ciphered
Message type: Remote UE Report Response
Remote UE response container: report acknowledged
| IE | Required | Description |
|---|---|---|
Remote UE response container | Optional | Carries the response or acknowledgment content for the earlier report. |
Remote UE response containerCarries the response or acknowledgment content for the earlier report.
Presence: Optional
In practice: In practice, compare this field with the original request and with any later release-dependent optional fields so you can see whether the network accepted the same service model the UE asked for.
Likely cause: Remote UE Report Response may be missing or not returned.
What to inspect: Check the report-response pair and the surrounding NAS branch.
Next step: Treat the issue as incomplete NAS reporting handling before blaming the reporting application.
It is the LTE NAS message the network sends after it processes a Remote UE Report.
Decode this message with the 3GPP Decoder, inspect the related message database, or open the matching call flow to see where this signaling step fits in the full procedure.